Activating/Deactivating Suppression Of The First Ringtone; Advisory Tones; Using The Handset As An Alarm Clock - Siemens Gigaset C455 User Manual

Setting ringer volume
The ringer volume is the same for all types of
ring.
¢
Audio Settings
§Menu§
Or in idle status:
t
Press briefly.
Then:
q
Adjust the volume and press
a
Press and hold (idle status).
Setting ringer melody
Set different ringer melodies for external calls,
internal calls and the alarm clock.
¢
Audio Settings
§Menu§
External Calls / Internal Calls
Select and press
q
Select melody (
.
§OK§
a
Press and hold (idle status).
Activating/deactivating the ringer
You can turn off the ringer on your handset
before you take a call or while the phone is in
the idle state. You can take a call so long as it is
displayed on the screen.
Deactivating the ringer
P
Press the star key and hold, until
Ú
the icon appears in the display.
Re-activating the ringer
P
Press and hold the star key in idle
status.
Activating/deactivating
suppression of the first ringtone
The phone identifies an incoming SMS from the
first network signal.
4 I O 2 5
§Menu§
~ 1
First ring muted.
§OK§
Or:
~ Q
First ring audible.
§OK§
Please remember:
If first ringtone muting is deactivated, then
every incoming SMS will be signalled by a ring-
tone. If you take this type of "call" at the first
ringtone, you will lose the SMS.
¢
Ringer Volume
§OK§
¢
Ringer Melody
/ Alarm Clock
.
§OK§
‰
= on) and press

Advisory tones

Your handset uses 'advisory tones' to tell you
about different activities and statuses. The fol-
lowing tones can be activated and deactivated
independently of each other:
u
Advisory tones:
– Key click: Each key press is acknowl-
edged.
.
– Confirmation tone (rising tone
sequence): at the end of an entry/set-
ting, when the handset is placed in the
base station and on arrival of an SMS or
a new entry in the answering machine
list or the calls list.
– Error tone (descending tone sequence):
when you make an incorrect entry.
– Menu end tone: when scrolling at the
end of a menu.
u
Battery warning tone: the battery requires
charging.
You cannot deactivate the confirmation tone
for placing the handset in the base station.
Activating/deactivating advisory tones
¢
Audio Settings
§Menu§
Setting the battery warning tone
¢
Audio Settings
§Menu§
/ /
On Off During Call
Using the handset as an alarm
clock
Activating/deactivating the alarm clock
¢
Alarm Clock
§Menu§
Or:
g
After you activate the alarm clock, the menu for
setting the wake up time opens automatically
(page 28).
If the alarm clock is set, the wake up time
appears with the
of the date.
Handset settings
¢
Advisory Tones
‰
Select and press (
§OK§
¢
Battery Low
‰
Select and press (
§OK§
battery warning tone is activated
or deactivated or sounds during a
call.
¢
Activation
Press the alarm clock key.
l
icon in the display instead
= on).
= on). The
‰
( = on)
27