Siemens Gigaset SL150 colour Instructions Manual page 40

28.10.05
Entering the number of an SMS centre, changing the send centre
You can enter and change the call number of an SMS centre. A previously stored SMS
centre number is changed by being overwritten.
You should find out about the services and special functions offered by your service pro-
vider before you make a new application and/or before you delete pre-configured call
numbers.
If your service provider supports the sending of text messages to email addresses you
can also enter a number for the "SMS to email" service. You will then be prompted to use
this number when sending a text message to an email address.
¢
v è
s
Service Centr.3
v
s
R[RRRRRRRRRRRRRRRRRRRR]
Edit
~
à
Save Entry
s
R[RRRRRRRRRRRRRRRRRRRR]
Edit
~
à
Save Entry
[RRRRRRRRRRRRRRRRRRRRR]
Save
a
i
¢ ¢
Settings Service Centres
OK
OK
OK
Ask your service provider for details of how you should enter service num-
bers if you wish to use personal mailboxes (assuming your service pro-
vider supports this function).
Select and confirm, e.g. Service Centr.3..
____ Service Centr.3____
f
g
Active send: Yes
SMS: no.
E-Mail: no.
Î
Save
If necessary select Yes in Active send: to activate
Service Centr.3 as send centre. The previously
selected send service centre is automatically deacti-
vated.
Scroll to the SMS: line and press the display key.
Enter the call number of the SMS centre and open
the menu.
Confirm.
If necessary, scroll to the E-Mail: line and press the
display key.
Enter the number of the email service and confirm.
Confirm.
Now press the display key to confirm the entry.
Long press (back to idle status).
SMS (Text Messages)
37