Siemens Gigaset SL150 colour Instructions Manual page 56

28.10.05
Self-help with error messages
Error Message
You cannot send messages.
You receive a message whose
text is incomplete.
You have stopped receiving
messages.
You receive no messages.
The message is played back.
Messages are only received
during the day.
Possible Cause
You have not requested the
CLIP service (Calling Line
Identification Presentation).
Message transfer was inter-
rupted (e.g. by a call).
No number or an invalid
number is entered for the SMS
centre activated as the send
centre.
Your phone's memory is full.
The provider has not yet sent
the rest of the message.
You have changed the ID of
your mailbox.
You have not activated your
mailbox.
The "display call number" serv-
ice is not activated.
Your terminal is stored in the
database of your SMS provider
as having no fixed network
SMS functionality, i.e. you are
no longer registered in it.
If your SMS network provider's
database does not yet know
that your terminal supports
fixed network SMS functional-
ity, then it will only attempt to
deliver messages during the
day.
SMS (Text Messages)
Remedy
Ask for this service to be
enabled.
Re-send the message.
Enter the telephone number.
Delete some old messages
(page 44).
Tell your SMS contacts your
new ID or undo the change
(page 49).
Activate your mailbox
(page 49).
Ask your network provider to
activate this service (there is a
charge for this).
Register the terminal (again)
for SMS reception.
Register the terminal (again)
for SMS reception to get it re-
assigned in the database.
53