Preheating - Sharp R-880D Operation Manual And Cooking Manual

Preheating

For best results of Convection and Convection Mix cooking, preheat to the required temperature in the
oven. Add food after preheating.
* To preheat the oven to 200 C
Step
Procedure
Select preheating tempera-
ture by pressing the PRE-
1
HEAT pad as required (for
200 C press four times).
Press the INSTANT COOK/
START pad.
2
Preheat is over. If the oven door is not opened, the
3 oven will automatically hold at the preheat temper-
ature for 30 minutes.
After preheating, suppose you want to bake cookies for 12 minutes on convection 200 C.
Open the door and place
4
food.
Close the door.
Press the CONVEC pad once.
If you want to change con-
vection temperature, press
5
the CONVEC pad until the de-
sired temperature appears in
the display.
Enter desired cooking time.
6
Press the INSTANT COOK/
START pad.
7
After preheating, suppose you want to cook with Mix (Convection). Press the MIX pad once or twice instead
of the CONVEC pad in Step 5 , then continue with Step 6.
If you are in the process of preheating and wish to check the actual oven temperature, simply press the
CONVEC pad. The actual oven temperature will be displayed as long as the CONVEC pad is pressed. If
the oven temperature is below 40 C at this time,
Warning:
The oven cavity, door, turntable, turntable support, racks, dishes and especially the bottom heater will
become very hot, use thick oven gloves when putting/removing the food or turntable into/from the oven
to PREVENT BURNS.
Pad Order
x 4
x 1
1 2 0 0
The timer begins to count down.
will be displayed.
E – 12
Display
COOK will flash on and off.
ADD
COOK
PRESS CONVEC OR MIX will be
displayed.
COOK will flash on and off.
COOK
COOK
ADD
COOK
COOK
COOK