Preparation For Use - Sharp XL-60H Operation Manual

PREPARATION FOR USE

Unplug the AC power lead from the AC socket
before connecting or disconnecting any com-
ponent.
Speaker connection
Right speaker
1 2
Connect each speaker wire to the SPEAKER termi-
nals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
Notes:
Connect the wire with the white line to the minus
(-) terminal and the plain wire to the plus (+) ter-
minal.
Do not mix the right channel and left channel
wiring when connecting the speakers to the unit.
Do not let the bare speaker wires touch each
other as this may damage the amplifier and/or
speakers.
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
*60H/70H(SUK)08-12
Removing the speaker grilles
Left speaker
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
Caution:
When the speaker grilles are removed, the speaker
diaphragms are exposed. Make sure nothing comes
into contact with the speaker diaphragms.
White
line
Mounting the speaker grilles
Fit the four posts on the speaker grille into the
mounting holes and push them lightly with the palm
3
of your hand to secure.
8
8 00.1.5, 11:39 AM