Sharp XL-60H Operation Manual page 25

(Continued)
EON-PTY
4
1
Tune in the desired RDS station (when a station
name is being displayed).
2
Press the EON button when "EON" appears.
"PTY TI" will flash for about 4 seconds.
3
Whilst they are being displayed, select the de-
sired programme type by turning the jog dial.
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH
button.
The programme type and "WAITING" will be dis-
played for 2 seconds each.
"PTY" will appear, and the unit will enter the
EON-PTY stand-by mode.
*60H/70H(SUK)23-27
5
When a programme of the type specified starts
on an ON (other network) station, the unit will
automatically switch to the station broadcasting
the selected programme type, and "PTY" will
flash.
2
6
When the programme specified for the ON sta-
tion is over, the unit will automatically return to
the original station you were tuned to.
3
Note:
If the EON button is pressed when "EON" is not
displayed, "NO EON" will appear for 4 seconds
to indicate that the unit cannot enter the EON
stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON
button.
("Programme type"
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON
button. Within 4 seconds, press it again. The EON
stand-by mode will be cancelled.
"PTY" will go out.
24
24
"WAITING")
00.1.5, 11:41 AM