Sharp XL-60H Operation Manual page 24

(Continued)
To manually recall the stations
stored in memory
(Main unit operation)
1
1
Press the VOLUME/JOG button.
2
Each time you turn the jog dial one step, the
channel number will change.
After the channel number has been displayed
for 5 seconds, the frequency for that channel
will appear for 2 seconds, and then the station
name will appear.
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty.
"PS" and a station name appear alternately, and
the unit does not operate properly.
If a particular station is not broadcasting prop-
erly or a station is conducting tests, the RDS re-
ception function may not work properly.
*60H/70H(SUK)23-27
To switch the display
(Main unit operation)
2
Each time the DISPLAY MODE button is pressed
whilst an FM station is tuned in, the display will
switch as follows:
Station name
(PS)
Programme type
(PTY)
Frequency
When the station you are tuning in is not an RDS
station or even if it is an RDS station but there is no
station name or programme type information avail-
able, the display will switch as follows:
"NO PS"
"NO PTY"
Frequency
Notes:
"NO PS" or "NO PTY" will flash for about 5 sec-
onds, and then the frequency will be displayed.
The display can only be switched whilst tuned to
the FM band.
23
23
DISPLAY
MODE
00.1.5, 11:41 AM