Sound Control - Sharp XL-60H Operation Manual

(Continued)
Remote control
2 "AA" size batteries (UM/SUM-3, R6, HP-7
or similar)
Batteries are not included.
0.2m - 6m
(8" - 20")

SOUND CONTROL

Volume
(Main unit)
MIN
(Main unit operation)
When the VOLUME control is turned clockwise, the
volume will increase. When it is turned anti-clock-
wise, the volume will decrease.
(Remote control operation)
Press the VOLUME
ume and the VOLUME
volume.
*60H/70H(SUK)08-12
(Remote control)
15 MAX
button to increase the vol-
button to decrease the
10
When inserting or removing the batteries, push
them towards the ë battery terminals.
Installing the batteries incorrectly may cause the
unit to malfunction.
Precautions for battery use:
Insert the batteries according to the direction in-
dicated in the battery compartment.
Replace all old batteries with new ones at the
same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
Caution:
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Notes concerning use:
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit
with a soft cloth.
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
Servo Powered Volume:
The jog dial automatically comes out when the
power is turned on, and goes back when the unit
is set to the stand-by mode.
When the power is turned on, you can put the
jog dial in and out by pressing the VOLUME
SELECT button.
Note:
Do not push in the jog dial forcibly with your finger.
10
00.1.5, 11:39 AM