Sharp XL-60H Operation Manual page 23

(Continued)
To recall stations that have been
stored in memory (PTY search)
You can search a desired station by specifying the
programme type (news, sports, traffic programme,
etc. ... see pages 19-20) from among the stations
that have been stored in memory.
(ASPM is convenient for storing stations in
memory.)
1
3
2
4,6
2,3
1
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the FUNCTION button until "FM" or "AM"
appears in the display.
3
Press the BAND button to select the FM ST or
FM band.
4
Press the PTY.TI SEARCH (PTY.TI) button.
"PTY TI" will flash for about 4 seconds.
5
Within 4 seconds, turn the jog dial on the main
unit or press the PRESET (
the remote control to select the programme type
you want.
Each time the button on the remote control is
pressed, the programme type will appear. If the
button is held down for more than 0.5 seconds,
the programme type will continuously change.
60H/70H(SUK)18-22
6
Whilst the selected programme type is flashing
(within 4 seconds), press the PTY.TI SEARCH
(PTY.TI) button again.
After the name of the selected programme type
has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
4,6
5
5
Note:
If the programme type has changed from flashing
to steadily lit and the PTY.TI SEARCH (PTY.TI)
button is pressed, nothing will happen. In this case,
start again from step 4.
Each time a station of the programme type you want
is encountered, you will be able to listen to the
broadcast.
The channel number will flash for about 4 seconds.
The station name will flash for 7 seconds, and then
remain lit.
If you want to listen to another station of that pro-
gramme type, press the PTY.TI SEARCH
(PTY.TI) button whilst the channel number or sta-
tion name is flashing. The unit will look for the
next station of that type.
Note:
If no station of the programme type you want can
be found, "NOTFOUND" will appear for 4 sec-
onds.
If you have selected the traffic programme:
If you select traffic programme (TP) as the pro-
gramme type in step 5, to receive only radio sta-
tions which broadcast traffic programmes, the TP
will appear.
or ) button on
(However, this does not necessarily mean that you
will hear any traffic announcements at that time.)
When a traffic announcement is actually being
made, the TA will appear.
(When both the TP and TA appear, an announce-
ment is being made.)
22
22 00.1.5, 11:40 AM