Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. XL-UH4H Micro Component System consisting of XL-UH4H (main unit) MICRO COMPONENT SYSTEM and CP-UH4H (speaker system).
Where plug destroyed immediately and disposed of in a safe manner. this is not possible, please visit our web-site www. sharp.co.uk/ Under no circumstances should the cut-off plug be inserted else- customersupport.aspx...
Page 3
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
Special Note Contents XL-UH4H Page Supply of this product does not convey a license nor imply any right General Information to distribute content created with this product in revenue-generating Precautions ......... . 5 broadcast systems (terrestrial, satellite, cable and/or other distribu- Controls and indicators .
SHARP will not be held responsible for any dam- In case of an electrical storm, unplug the age resulting from use of this unit with a voltage other than that which unit for safety.
System connections XL-UH4H Make sure to unplug the AC power lead before any connections. Aerial connection (see page 10) FM aerial AM loop aerial Right speaker Left speaker Speaker connection Wall socket (see page 10) (AC 230 V, 50 Hz)
System connections (continued) XL-UH4H Aerial connection Speaker connection Supplied FM aerial: Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
XL-UH4H AC power connection External FM aerial After checking all the connections have been made correctly, plug Use an external FM aerial if you require better reception. the AC power lead of this unit into the wall socket. If you plug in the Consult your dealer.
Remote control XL-UH4H Battery installation Notes concerning use: Replace the batteries if the operating distance is reduced or if the 1 Open the battery cover. operation becomes erratic. Purchase 2 "AAA" size batteries (UM- 2 Insert the batteries according to the direction indicated in 4, R03, HP-16 or similar).
General control XL-UH4H Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume.
Setting the clock XL-UH4H In this example, the clock is set for the 24-hour (0:00) display. In STAND-BY condition. Press the CLOCK/TIMER button for more than 2 seconds. Within 10 seconds, press the PRESET ( ) button to set hour.
Listening to a CD or MP3/WMA disc XL-UH4H This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.
Listening to a CD or MP3/WMA disc (continued) XL-UH4H To move to the beginning of the next track: Press the ON/STAND-BY button to turn the power on. During playback, press the button. Open the CD compartment. To skip a number of tracks at one time:...
Advanced CD or MP3/WMA disc playback XL-UH4H Direct track search Notes: A track number higher than the number of tracks on the disc By using the direct search buttons, the desired tracks on the current cannot be selected. disc can be played.
Advanced CD or MP3/WMA disc playback (continued) XL-UH4H Repeat play (REMOTE CONTROL ONLY) To cancel random playback, press the button again, so that the ran- Repeat play can play single track and all track sequence continu- dom indicator will disappear.
XL-UH4H Programmed play To cancel the programmed play mode: Press the button or STOP button on the remote control. The Whilst in the stop mode, press the MEMORY/DISP button "MEMORY" indicator will disappear and all the programmed con- to enter the programming save mode.
Advanced CD or MP3/WMA disc playback (continued) XL-UH4H Programmed play (Folder mode) Press the MEMORY/DISP button to save the track number. Whilst in the stop mode, press the MEMORY/DISP button to enter the programming save mode. MEMORY MEMORY MEMORY Repeat steps 2 – 5 for other folder/tracks. Up to 32 tracks can be programmed.
MP3/WMA folder mode (only for MP3/WMA files) XL-UH4H To playback MP3/WMA (Windows Media Audio) file All the files inside the selected folder will be played back. There are many music sites on the internet that you can download In case Folder D is selected, file 4, 5 and 6 will be played back. File MP3/WMA (Windows Media Audio) music files.
MP3/WMA folder mode (only for MP3/WMA files) (continued) XL-UH4H Procedure to playback MP3/WMA disc Select desired track to be played back by pressing the To playback CD-R/RW. button. Proceed to step 4. Press the CD button, and load a MP3/WMA disc.
Listening to USB mass storage device / MP3 player XL-UH4H Press the TUNING/FOLDER ( ) button to select de- sired playback folder. To start playback with folder mode, go to step 4. To change the playback folder, press the TUNING/FOLDER ( ) button to select another folder.
Disconnect USB memory device from the USB terminal. Notes: SHARP will not be held liable for the loss of data whilst the USB Note: memory device is connected to the audio system. This product is not compatible with MTP and AAC file systems.
Notes: Press the USB/SD button. Playback will start and the SHARP will not be held liable for the loss of data whilst the SD track name will be displayed. memory device is connected to the audio system. Press the MEMORY/DISP button (ID3 ON/OFF) to display Title, Files compressed in MP3 and / or WMA format can be played Artist and Album name.
Advanced USB/SD playback XL-UH4H Programmed play Press the direct search buttons on the remote control to select the desired tracks. Whilst in the stop mode, press the MEMORY/DISP button to enter the programming save mode. MEMORY MEMORY You can also select a track by pressing the button.
Page 27
XL-UH4H To cancel the programmed play mode: Press the button or STOP button on the remote control. The "MEMORY" indicator will disappear and all the programmed con- tents will be cleared. Notes: Removing the USB/SD memory device automatically cancels the programmed sequence.
Advanced USB/SD playback (continued) XL-UH4H Repeat play (REMOTE CONTROL ONLY) To cancel random playback, press the button again, so that the ran- dom indicator will disappear. Repeat play can play single track and all track sequence continu- ously. Notes: If you press the button during random play, you can move to the track selected next by the random operation.
Listening to the radio XL-UH4H Notes: When radio interference occurs, auto scan tuning may stop automatically at that point. Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING/FOLDER ( button again. When an RDS (Radio Data System) station is tuned in, the fre- quency will be displayed first, and then the RDS indicator will light up.
Using the Radio Data System (RDS) Listening to the radio (continued) XL-UH4H RDS is a broadcasting service which a growing number of FM Within 10 seconds, press the PRESET ( ) button to stations provide. These FM stations send additional signals select the preset channel number.
XL-UH4H To stop the ASPM operation before it is complete: Notes: Press and hold the RDS (ASPM/PTY) button for more than 3 The same station name can be stored in different channels. seconds whilst it is scanning for stations. In a certain area or during certain time periods, the station names The stations which are already stored in memory will be kept there.
Using the Radio Data System (RDS) (continued) XL-UH4H To show Radio Data System signals on display To recall stations in memory Select an FM station with Radio Data System signals. To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traffic programme, etc.
XL-UH4H Notes: Descriptions of the PTY (Programme Type) codes signal. If the display has stopped flashing, start again from step 2. If the You can search for and receive the following PTY. unit finds a desired programme type, the corresponding channel...
Using the Radio Data System (RDS) (continued) XL-UH4H COUNTRY Songs which originate from, or continue the musical LIGHT M Classical music for general, rather than specialist tradition American Southern States. appreciation. Examples of music in this category Characterised by a straightforward melody and are instrumental music, and vocal or choral works.
Timer and sleep operation XL-UH4H Press the PRESET ( ) button to set minute and then press the CLOCK/TIMER button. Switch input with the PRESET ( ) button to select "OFF TIME" and then press the CLOCK/TIMER button. Timer playback...
Page 36
Timer and sleep operation (continued) XL-UH4H To select a preset channel number, press the PRESET ( To select CD, press the CD button and then press the ) button and then press the CLOCK/TIMER button. CLOCK/TIMER button. Press the SLEEP button for more than 2 seconds to...
XL-UH4H Sleep operation To confirm the remaining sleep time: The radio, compact disc and USB/SD can all be turned off automat- 1 Whilst "SLEEP" is indicated, press the SLEEP button. The remaining sleep time is displayed for about 10 seconds.
XL-UH4H Many potential problems can be resolved by the owner without call- ing a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. General Symptom Possible cause The clock is not set to the Did a power failure occur? Reset correct time.
Page 39
XL-UH4H Remote control Condensation Sudden temperature changes, storage or operation in an extremely Symptom Possible cause humid environment may cause condensation inside the cabinet (CD The remote control does Is the AC power lead of the unit pickup, etc.) or on the transmitter on the remote control.
Maintenance Troubleshooting chart (continued) XL-UH4H Before transporting the unit Cleaning the cabinet Remove the CD from the unit. Make sure there is no CD in the disc Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
Specifications XL-UH4H As part of our policy of continuous improvement, SHARP reserves CD player the right to make design and specification changes for product Type Compact disc player improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may...
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service Facility within one year from the date this product was purchased. Proof of purchase must be provided.