Sharp XL-60H Operation Manual page 15

(Continued)
RANDOM/
REPEAT
Repeat and random play
(Remote control operation)
1
Press the RANDOM/REPEAT button.
Each time this button is pressed, the mode will
change in the following order:
Repeat play Random play
2
Press the 0 / CD( 0 6 ) button to start play-
back.
To cancel repeat or random play:
Press the RANDOM/REPEAT button until " R " or
"RANDOM" disappears.
To repeat playback of selected tracks:
After entering the programme for the tracks you
want to listen to using "APMS", select repeat play
and start playback.
Notes:
If you press the 2 4 button during random
play, you can move to the next track. On the other
hand, the 5 3 button does not allow you to
move to the previous track. The beginning of the
track being played will be located.
When using random play or repeat play, be sure
to press the button after you are through lis-
tening. Otherwise, the disc will play continuously.
During APMS operation, random play is not pos-
sible.
60H/70H(SUK)13-17
APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
To listen again to the track being played:
(Main unit operation)
1
Press the VOLUME/JOG button.
The track number will flash.
Jog dial
2
Whilst the track number is flashing, turn the jog
dial anti-clockwise.
(Remote control operation)
Press the 5 3 button for less than 0.5 seconds
VOLUME/
during playback.
JOG
To move to the beginning of the next track:
(Main unit operation)
1
Press the VOLUME/JOG button.
The track number will flash.
2
Whilst the track number is flashing, turn the jog
dial clockwise.
(Remote control operation)
Press the 2 4 button for less than 0.5 seconds
during playback.
To skip a number of tracks at one time, press the
5 3 or 2 4 button on the remote control
repeatedly until the desired track number is
shown.
To start playing at a desired track, press the 5
3 or 2 4 button on the remote control whilst
in the stop mode to select the track number, and
then press the 0 / CD 6 (0 6) button.
Cue and review
Normal play
1
Load a disc and begin playback.
2
Hold the 2 button down for audible fast for-
ward, and hold the 3 button down for audible
fast reverse.
3
Normal playback will resume when the 2 or
3 button is released.
Notes:
When the end of the disc is reached whilst
cueing, the "END" will appear in the display and
CD operation is paused. Press the
stop CD operation.
If the beginning of the disc is reached whilst re-
viewing, playback will start when you release the
3 button.
14
14
button to
00.1.5, 11:39 AM