Pyrolysis: Automatic Oven Cleaning - Smeg Oven User Manual

4.7 Pyrolysis: automatic oven
cleaning
Pyrolysis is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolysis cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the instructions on the product);
leave it to act for 60 minutes, then rinse
and dry the glass using kitchen roll or a
microfibre cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the roof lining (where present).
• Close the door.
Cleaning and maintenance
Pyrolysis setting
1. Select using the function knob turned to
symbol or
2. Press the temperature knob to start the
pyrolysis. The
on.
3. Turn the temperature knob to the right or
to the left to set the cleaning cycle
duration from a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is 120 minutes).
4. Press the temperature knob to start the
pyrolysis.
Recommended pyrolysis duration:
• Light dirt: 120 minutes.
• Medium dirt: 150 minutes.
• Heavy dirt: 180 minutes.
.
indicator light comes
43