Pyrolysis: Automatic Oven Cleaning (On Some Models Only) - Smeg Oven Instruciton For Use

4.10 Pyrolysis: automatic oven
cleaning (on some models only)
Pyrolysis is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove food residue and drips from
previous cooking from the inside of the
oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolysis cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Close the door.
Cleaning and maintenance
Pyrolysis setting
1. Turn the function knob to symbol
2. Turn setting knob A anticlockwise to set
the duration of pyrolysis visible in the
cooking symbol window C.
Recommended pyrolysis duration:
• Light dirt: 120 minutes.
• Medium dirt: 150 minutes.
• Heavy dirt: 180 minutes.
3. After selecting the pyrolysis time, the
thermostat light will start flashing and the
oven will begin to heat up.
4. Two minutes after the pyrolysis cycle has
started the door is locked (the door lock
indicator light comes on) by a device
that prevents the door from being
opened.
It is not possible to select any
function once the door locking
device has been activated.
5. When pyrolysis has finished, a buzzer
will indicate the end of the automatic
cleaning cycle.
6. Return the function knob to the 0 position.
7. The door remains locked as long as the
temperature inside the oven returns to
safety levels.
.
53