Table of Contents
Advertisement
Problem 2:
Solution 2:
6.4 Wireless Access
Problem 1:
Solution 1:
6
Check if other PCs work. If they do, ensure that your PCs IP
settings are correct. If using a Fixed (Static) IP Address,
check the Network Mask, Default gateway and DNS as well
as the IP Address.
7
If the PCs are configured correctly, but still not working, check
the Wireless Router. Ensure that it is connected and ON.
Connect to it and check its settings. (If you can't connect to it,
check the LAN and power connections.)
8
If the Wireless Router is configured correctly, check your
Internet connection (DSL/Cable modem etc) to see that it is
working correctly.
Some applications do not run properly when using the Wireless
Router.
The Wireless Router processes the data passing through it, so it
is not transparent.
Use the Content Filter Settings feature to allow the use of Internet
applications, which do not function correctly.
If this does solve the problem you can use the DMZ function. This
should work with almost every application, but:
9
It is a security risk, since the firewall is disabled.
10 Only one (1) PC can use this feature.
My PC can't locate the Wireless Router.
Check the following:
7
Your PC is set to Infrastructure Mode. (Access Points are
always in Infrastructure Mode)
8
The SSID on your PC and the Wireless Router are the same.
9
Remember that the SSID is case-sensitive. So, for example
"Workgroup" does NOT match "workgroup."
10 Both your PC and the Wireless Router must have the same
setting for security. The default setting for the Wireless
Router security is disabled, so your wireless station should
also have security disabled.
11 If security is enabled on the Wireless Router, your PC must
have security enabled, and the key must be matched.
76
6. Appendix A: Troubleshooting
AirLive N.MINI User's Manual
Advertisement
Table of Contents
