Table of Contents
Advertisement
l
Ensure the "Gateway" field for your network card is set to the IP Address of the
Wireless Router.
l
Ensure your DNS (Name Server) settings are correct.
5.2.10 Wireless Station Configuration
l
This section applies to all wireless stations wishing to use the Wireless Router 's
access point, regardless of the operating system that is used on the client.
l
To use the Wireless Router, each wireless station must have compatible settings, as
following:
Mode
SSID (ESSID)
Disable
WEP
WPA
WPA2
WPA-Mixed
802.1x
Note
By default, the Wireless Router will allow 802.11b, 802.11g and 802.11n connections
The mode must be set to Infrastructure.
The network name must match the value used on the Wireless
Router.
Note
The SSID is case- sensitive.
If there is no security is enabled on the Wireless Router, the
security of each station should be disabled as well. And, you can
connect the Wireless Router without security, but it is NOT
recommended.
By default, WEP on the Wireless Router is disabled.
l
If WEP remains disabled on the Wireless Router, all stations
must have WEP disabled.
l
If WEP is enabled on the Wireless Router, each station must
use the same settings as the Wireless Router.
RADIUS Server: RADIUS is an authentication, authorization and
accounting client-server protocol. The client is a Network Access
Server that desires to authenticate its links. The server is a server
that has access to a user database with authentication
information. Each station must set up the RADIUS Server's IP
address, port and passwords that provided by your ISP.
74
5. PC Configuration
AirLive N.MINI User's Manual
Advertisement
Table of Contents
