Table of Contents
Advertisement
WPS button
Press the physical WPS button on the Wireless Router once, or go
to enable the WPS function via web configuration (Go to Wireless >
WPS page), then the LED will start to flash. Please make a
connection with other WPS supported device within 2 minutes.
LED Behavior
LED
Printed
POWER
PWR
System
SYS
Wireless
WLAN
LAN
WPS
WPS
Ethernet
Ethernet
AirLive N.MINI User's Manual
Color
Behavior
Off
Green
On
Blinking
On
Green
Blinking
Off
Green
On
Blinking
Off
On
Green
Blinking
Off
Green
On
Blinking
3
Indication
Power off
Power on
Power saving mode starting
Press reset button two seconds
the LED will on, keep on pressing
more than 3-5 seconds, the LED
will start to flash
System CPU is busy
WLAN function off
WLAN link / active
WLAN traffic transmitting
WPS Off
WPS active and connected
WPS is enabled to make a
connection
No Ethernet cable connecting
Ethernet cable connected
Receiving/ sending data
1. Introduction
Advertisement
Table of Contents
