Firewall; Port Filtering - Ovislink N.MINI User Manual

4.4 Firewall

4.4.1 Port Filtering

Enable Port Filtering
Port Range
Protocol
Comment
Apply Changes
Reset
Current Filter Table
Delete Selected
Delete All
Reset
Check to enable Port Filtering function.
Enter the beginning of the range of port numbers used by the
service. If the service uses a single port number, enter it in both
the start and finish fields.
Select the protocol (TCP, UDP or Both) used to the remote
system or service.
You may key in a description MAC address.
After completing the settings on this page, click Apply Changes
button to save the settings.
Click Reset button to restore to default values.
Shows the current Port Forwarding information.
Click Delete Selected button to delete items which are selected.
Click Delete All button to delete all the items.
Click Reset button to rest.
46
4. Web Configuration
AirLive N.MINI User's Manual