Table of Contents
Advertisement
4.2.7 WPS
Disable WPS
WPS Status
Self-PIN Number
Push Button
Configuration
Current Key Info
AirLive N.MINI User's Manual
Check the box to disable the WPS function, default setting is
enabled.
Here shows the current status of the WPS function. Default
setting is Configured, click Reset to UnConfigured to
re-configured the WPS connection.
Here shows the 8-digit numbers PIN code of the router itself.
Enter the Self-PIN Number to client (Registrar) end and click the
PIN button at the client end to make a WPS connection. It will
connect with the wireless router within two minutes and get IP
address.
Click Start PBC button (or press the physical WPS button on the
Wireless Router once), meanwhile, the client should also click the
PBC button simultaneously within 2 minutes.
This table shows the security status of the Wireless Router. If user
would like to set up the security, please go to Wireless > Security.
35
4. Web Configuration
Advertisement
Table of Contents
