Security - Ovislink N.MINI User Manual

Beacon Interval
Preamble Type
IAPP
Protection
Aggregation
Short GI
WLAN Partition
STBC
20/40MHz Coexist
RF Output Power

4.2.3 Security

AirLive N.MINI User's Manual
Beacon Interval is the amount of time between beacon
transmissions. Before a station enters power save mode, the
station needs the beacon interval to know when to wake up to
receive the beacon. Range 20-1024 ms, default is 100.
A preamble is a signal used in wireless environment to
synchronize the transmitting timing including Synchronization and
Start frame delimiter. You can select Long or Short for the
preamble type.
Select Enabled or Disabled to execute this function.
Select Enabled or Disabled to execute the security function.
Select Enabled or Disabled to execute this function.
Select Enabled or Disabled to execute this function.
Select Enabled or Disabled to execute this function.
Select Enabled or Disabled to execute this function. The default is
Disabled.
Select Enabled or Disabled to execute this function. The default is
Disabled.
Select the transmitting power rate 100%, 70%, 50%, 35%, 15%.
23
4. Web Configuration