Table of Contents
Advertisement
4.4.2 IP Filtering
Enable IP Filtering
Local IP Address
Protocol
Comment
Apply Changes
Reset
Current Filter Table
Delete Selected
Delete All
Reset
AirLive N.MINI User's Manual
Check to enable IP filtering function.
Enter the local computer's IP address.
Select the protocol (TCP, UDP or Both) used to the remote
system or service.
You may key in a description for the port range.
After completing the settings on this page, click Apply Changes
button to save the settings.
Click Reset button to restore to default values.
Shows the current IP filter information.
Click Delete Selected button to delete items which are selected.
Click Delete All button to delete all the items.
Click Reset button to rest.
47
4. Web Configuration
Advertisement
Table of Contents
