Table of Contents
Advertisement
Enable Static Route
IP Address
Subnet Mask
Gateway
Metric
Interface
4.7 Management
4.7.1 Status
This page shows the current Wireless Router settings information.
AirLive N.MINI User's Manual
If you connect several routers with this Wireless Router, you
may need to set up a predefined routing rule to have more
effective network topology/traffic, this is called static route
between those routers and the Wireless Router.
To set static routers, enter the settings including route IP address,
route mask, route gateway and the route Interface from LAN or
WAN.
Set up the IP address that would like to send the packets pass
through.
Set up the Subnet Mask that would like to send the packets pass
through.
Set up the gateway that would like to send the packets pass
through.
It is used by a router to make routing decisions.
The metrics used by a router to make routing decisions. It is
typically one of many fields in a routing table. Router metrics can
contain any number of values that help the router determine the
best route among multiple routes to a destination. A router metric
typically based on information like path length, bandwidth, load,
hop count, path cost, delay, Maximum Transmission Unit (MTU),
reliability and communications cost.
Select the interface of the setting path.
55
4. Web Configuration
Advertisement
Table of Contents
