Table of Contents
Advertisement
1.4.2 Bottom Switch
Reset button and switch bar
Reset
Keep on pressing the Reset button more than 3 seconds, the
Wireless Router will set all setting back to factory default values.
Switch
User need to MANUALLY switch the bar into the mode preferred,
Router, AP or Client mode, then the device will reboot automatically
into the mode selected.
1.4.3 Side Panel
Ethernet and power ports
Ethernet
When the mode be set to AP or Client modes, use standard LAN
cables (RJ45 connectors) to connect your PCs to this port. If
required, any port can be connected to another hub. Any LAN port
will automatically function as an "Uplink" port when necessary.
When the mode be set to Router mode, connect the ADSL or Cable
Modem here with RJ45 cable. If your modem came with a cable, use
the supplied cable, otherwise, use a standard LAN cable (RJ45
connectors).
Power (5V)
Connect the supplied power adapter here.
AirLive N.MINI User's Manual
4
1. Introduction
Advertisement
Table of Contents
