Table of Contents
Advertisement
Channel Width
Control Sideband
Channel Number
Broadcast SSID
WMM
Data Rate
Associated Clients
Enable Mac Clone
(Single Ethernet
Client)
Enable Universal
Repeater Mode
(Acting as AP and
Client
simultaneously)
AirLive N.MINI User's Manual
This function will be available under 2.4GHz (N), 2.4GHz (G+N),
2.4GHz (B+G+N) mode. Select 20MHz the channel number will
be form 5~11 and auto; Select 40MHz channel width the channel
number will be form 1~11 and auto. Default is 40MHz.
This function will be available under 2.4GHz (N), 2.4GHz (G+N),
2.4GHz (B+G+N) mode. Select upper or lower form the pull-down
list, default is upper.
The channel number base on the channel width you select.
Enabled: This Wireless Router will show its network name(SSID)
to stations.
Disabled: This Wireless Router will hide the network name to
stations. If stations want to connect to this Wireless Router, this
Router's network name(SSID) should be known in advance to
make a connection.
The Wi-Fi Multiple Media function is available under 2.4GHz (B),
2.4GHz (G) and 2.4GHz (B+G) band, and it is disabled under
2.4GHz (N), 2.4GHz (G+N) and 2.4GHz (B+G+N) band.
There are several data rate that you can select from the pull-down
menu.
Click
This function will be enabled under Client mode.
This function will be enabled under AP mode.
button to show all connected clients.
21
4. Web Configuration
Advertisement
Table of Contents
