Operating Procedure - Microtek 715C User Manual

Operating Procedure

The buttons on the right side of the Control Panel are used to
navigate the OSD. Follow the sequence below to do the
following: Navigate the OSD menu item, go through the
submenus, select a setting, save or cancel the setting, and
finally exit the OSD item.
1. Power on the LCD monitor.
2. Press the "MENU" button to display the OSD menu.
3. Press the " " or " " button to select a menu item.
4. Press the "MENU" button again to enter the selected
submenu.
5. Press the " " or " " button to select a submenu item.
Note: If a user setting does not appear, go to step 9.
6. Press the "MENU" button to specify a user setting.
7. Press the " " or " " button to increase or decrease the value
of the setting.
8. Press the "EXIT" button when finished adjusting and to
accept the user setting.
- Or-
9. Press the "MENU" button to return to the submenu.
9