Installer Checklist - Thermador P24WK Installation Instructions Manual

FINAL CHECK LIST
Cooktop correctly posi-
tioned and anchored in
countertop recess.
Specified clearances main-
tained to cabinet surfaces.
Unit Level – front to back –
side to side.
Burner caps positioned prop-
erly on sealed burner bases.
All packaging material re-
moved.
Backguard attached (if hori-
zontal clearance to combus-
tible materials behind cook-
ing surface is less than 12").
The stainless steel radiant
and porcelain grill grate is in
place.
The griddle plate is correctly
positioned and leveled.

INSTALLER CHECKLIST

GAS SUPPLY
Connection: 3/4" NPT with a
minimum 3/4" diameter flex
line.
The appliance is connected
only to the type of gas for
which it is certified for use.
The pressure regulator
(shipped with unit) has been
connected to the manifold
and is set for 5" W.C. for
natural gas or 10" W.C. for
propane.
Manual gas shut off valve in-
stalled in an accessible loca-
tion (without requiring re-
moval of appliance).
Unit tested and free of gas
leaks.
Gas supply pressure does not
exceed 14" W.C.
ELECTRICAL
Polarized and grounded
120VAC, 10 Amp receptacle
with 10 Amp over-current
protection is provided for
service cord connection.
14
OPERATION
All internal packing materi-
als removed. Check below
grates and grill pans.
Burner caps properly seated
into burner bases.
Grill components properly
seated (not all models). Re-
fer to Care & Use Manual for
Grill details.
Bezels centered on burner
knobs, and knobs turn freely.
Each burner lights satisfac-
torily, both individually and
with other burners operat-
ing.
Air Shutter adjustment for
proper flame made for Grill
and Griddle. See Fig. 13.
Griddle is level or tilted
slightly forward and does not
rock (not all models).
Burner grates correctly posi-
tioned, level, and do not rock.