Switching Stat List Editor Contexts - Texas Instruments TI-82 STATS Manual Book

Switching Stat List Editor Contexts

Stat List Editor
Contexts
The stat list editor has four contexts.
View-elements context
View-names context
The stat list editor is first displayed in view-elements context.
To switch through the four contexts, select
menu and follow these steps.
STAT EDIT
1. Press } to move the cursor onto a list name. You are now in
view-names context. Press ~ and | to view list names
stored in other stat list editor columns.
2. Press Í. You are now in edit-elements context. You
may edit any element in a list. All elements of the current list
are displayed in braces (
| to view more list elements.
3. Press Í again. You are now in view-elements context.
Press ~, |, †, and } to view other list elements. The
current element's full value is displayed in the entry line.
4. Press Í again. You are now in edit-elements context.
You may edit the current element in the entry line.
5. Press } until the cursor is on a list name, then press y
[ ]. You are now in enter-name context.
INS
Press '. You are now in view-names context.
6.
Press †. You are now back in view-elements context.
7.
Edit-elements context
Enter-name context
1:Edit
)in the entry line. Press ~ and
{ }
Statistics 12–17
from the