Texas Instruments TI-82 STATS Manual Book page 198

LIST OPS Menu
Matr4list(
11–16 Lists
(continued)
(matrix stored to lists) fills each listname with
Matr4list(
elements from each column in matrix. If the number of listname
arguments exceeds the number of columns in matrix, then
ignores extra listname arguments. Likewise, if the
Matr4list(
number of columns in matrix exceeds the number of listname
arguments, then
Matr4list(
matrix listname1
Matr4list( ,
also fills a listname with elements from a specified
Matr4list(
column# in matrix. To fill a list with a specific column from
matrix, you must enter a column# after matrix.
matrix column#
Matr4list( ,
Ù Ù Ù Ù
preceding one to five characters identifies those characters as a
user-created listname. listname may comprise letters, q, and
numbers, but it must begin with a letter from A to Z or q.
Ù Ù Ù Ù
listname
Ù Ù Ù Ù
Generally, must precede a user-created list name when you
enter a user-created list name where other input is valid, for
example, on the home screen. Without the
may misinterpret a user-created list name as implied
multiplication of two or more characters.
Ù Ù Ù Ù
need not precede a user-created list name where a list name is
the only valid input, for example, at the
stat list editor or the
editor. If you enter
will ignore the entry.
ignores extra matrix columns.
listname2 . . .
, ,
&
listname
, )
&
and prompts in the stat plot
Xlist: Ylist:
Ù Ù Ù Ù
where it is not necessary, the TI-82 STATS
listname n
, )
Ù Ù Ù Ù
, the TI-82 STATS
prompt in the
Name=