Texas Instruments TI-82 STATS Manual Book page 195

Before Using
Select(
Using Select( to
Select Data
Points from a
Plot
Before using
Select(
1. Create two list names and enter the data.
2. Turn on a stat plot, select
enter the two list names for
3. Use
ZoomStat
To select data points from a scatter plot or xyLine plot, follow
these steps.
1. Press y [
LIST
menu. is pasted to the home screen.
Select(
2. Enter xlistname, press ¢, enter ylistname, and then press ¤
to designate list names into which you want the selected data
to be stored.
3. Press Í. The graph screen is displayed with
in the bottom-left corner.
Left Bound?
4. Press } or † (if more than one stat plot is selected) to move
the cursor onto the stat plot from which you want to select
data points.
5. Press | and ~ to move the cursor to the stat plot data point
that you want as the left bound.
, follow these steps.
" " " "
(scatter plot) or
and
Xlist:
to plot the data (Chapter 3).
] ~
to select
8 8:Select(
Ó Ó Ó Ó
(xyLine), and
(Chapter 12).
Ylist:
from the
LIST OPS
Lists 11–13