Using Split Screen - Texas Instruments TI-82 STATS Manual Book

Using Split Screen

Setting a Split-
Screen Mode
To set a split-screen mode, press z, and then move the
cursor to the bottom line of the mode screen.
Select (horizontal) to display the graph screen and
Horiz
another screen split horizontally.
Select (graph-table) to display the graph screen and
G.T
table screen split vertically.
$
The split screen is activated when you press any key that applies
to either half of the split screen.
Some screens are never displayed as split screens. For example,
if you press z in
displayed as a full screen. If you then press a key that displays
either half of a split screen, such as r, the split screen
returns.
When you press a key or key combination in either
mode, the cursor is placed in the half of the display for which
that key applies. For example, if you press r, the cursor is
placed in the half in which the graph is displayed. If you press
y [
], the cursor is placed in the half in which the table is
TABLE
displayed.
The TI-82 STATS will remain in split-screen mode until you
change back to
Full
or mode, the mode screen is
Horiz G.T
screen mode.
$
or
Horiz G.T
Split Screen 9–3