Texas Instruments TI-82 STATS Manual Book page 420

Error Conditions
Error Type
DOMAIN
Duplicate Name
Error in Xmit
ILLEGAL NEST
INCREMENT
INVALID
B–6 General Information
(continued)
Possible Causes and Suggested Remedies
¦ You specified an argument to a function or instruction
outside the valid range. This error is not returned during
graphing. The TI-82 STATS allows for undefined values on a
graph. See Appendix A and the appropriate chapter.
¦ You attempted a logarithmic or power regression with a
an exponential or power regression with a
¦ You attempted to compute
A variable you attempted to transmit cannot be transmitted
because a variable with that name already exists in the receiving
unit.
¦ The TI-82 STATS was unable to transmit an item. Check to
see that the cable is firmly connected to both units and that
the receiving unit is in receive mode.
¦ You pressed É to break during transmission.
¦ You attempted to perform a backup from a TI
TI-82 STATS.
¦ You attempted to transfer data (other than
from a TI-82 STATS to a TI
¦ You attempted to transfer
to a TI 82 without using
.
menu.
You attempted to use an invalid function in an argument to a
function, such as
seq(
¦ The increment in
is not returned during graphing. The TI-82 STATS allows for
undefined values on a graph.
¦ The increment in a
¦ You attempted to reference a variable or use a function where
it is not valid. For example,
or .
TblStart
¦ You attempted to reference a variable or function that was
transferred from the TI
TI-82 STATS. For example, you may have transferred
to the TI-82 STATS from the TI
reference it.
¦ In mode, you attempted to graph a phase plot without
Seq
defining both equations of the phase plot.
or
GPrn( GInt(
82.
.
through
L
1
5:Lists to TI82
within expression for
is 0 or has the wrong sign. This error
seq(
loop is 0.
For(
n cannot reference
Y
82 and is not valid for the
.
82 and then tried to
.
LX
.
LY
with pmt2 < pmt1.
82 to a
.
through )
L L
1 6
from a TI-82 STATS
L
6
on the
LINK SEND
.
seq(
,
Y Xmin
UnN1
or
, ,
@X