Texas Instruments TI-82 STATS Manual Book page 213

Editing a List
Element
To edit a list element, follow these steps.
1. Move the rectangular cursor onto the element you want to
edit.
2. Press Í to move the cursor to the entry line.
Note: If you want to replace the current value, you can enter a
new value without first pressing Í. When you enter the first
character, the current value is cleared automatically.
3. Edit the element in the entry line.
Press one or more keys to enter the new value. When you
enter the first character, the current value is cleared
automatically.
Press ~ to move the cursor to the character before which
you want to insert, press y [
more characters.
Press ~ to move the cursor to a character you want to
delete, and then press { to delete the character.
To cancel any editing and restore the original element at the
rectangular cursor, press ' Í.
Note: You can enter expressions and variables for elements.
4. Press Í, }, or † to update the list. If you entered an
expression, it is evaluated. If you entered only a variable, the
stored value is displayed as a list element.
When you edit a list element in the stat list editor, the list is
updated in memory immediately.
], and then enter one or
INS
Statistics 12–13