Vacuum Cleaner Description; Labels; Packing And Unpacking - Nilfisk-Advance WSS 100 Instructions For Use Manual

Vacuum cleaner description

Labels

1 Identification plate:
Code of the model, technical specifications, serial
number, CE marking, year of manufacture
2 Liquid container
3 Controls (switches)
4 Inlet
5 Vacuum motors
6 Liquid container closing band
7 Diverter valve control (WST 100 DV only)
8 Liquid level indicator tube
9 Drain valve
10 Safety filters
11 Float for stopping liquids (located under chip basket)
Vacuuming of liquids and shavings
When the machine vacuums shavings and liquids produced
during the machining process, the solid shavings are captured
in the chip basket. Liquids flow into the container underneath
(2).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet (4) and then fit the required tool to the end of the
hose.
The float (11) stops the vacuuming operation (the vacuuming
units remain activated) when the liquid container (2) is full; it
is then necessary to turn off the vacuum cleaner and to empty
the liquid container (2).
Figure 1

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Model A (in)
WSS 100 28
WST 100 DV 28
3
WSS100 - WST100 DV
Figure 2
B (in) C (in)
34 59
47 59
Lbs
143
165
09/2009