Machine/Tool ID: WDNI-1 Wet Dry Vacuum
Vendor: Rug Doctor
Vendor Website:
Mfg. Support Phone No.: 1-800-784-3628
Tool Application: Clean up your home improvement jobs with commercial-grade suction that tackles dirt, debris,
spills and floods.
Operation Guide: Read all instructions completely before you begin.
USER MUST CAREFULLY READ AND FULLY UNDERSTAND ALL INSTRUCTIONS BEFORE USING
THIS MACHINE. Before operating the machine (including any attachments), renter agrees to fully read, understand, and
follow all safety warnings and instructions set forth below, which can be found on Rug Doctor's website
(www.rugdoctor.com).
USING THE MACHINE
Read all instructions carefully before using this machine. Check that the electrical switch is switched off (in position 0) and check
1
that the filters are installed in the machine.
Connect the suction hose into the suction inlet at the machine by pushing the hose forward until it fits firmly in place at the
2
inlet.
3
Connect the curved hand tube with the suction hose, twist the tool to ensure it is properly fitted.
4
Connect the extension tubes (individually) with the hose handle, twist the tubes to ensure they are properly fitted.
Attach suitable nozzle/tool to the extension tube. Choose tool depending on what type of material that is to be picked-up.
Extension Tubes are used to provide you with more reach and/or to use while standing.
5
Crevice Tool: Great for small spaces
Floor Tool: Ideal for larger areas
Upholstery Tool: Great for sofa, stairs, chairs and more
6
Connect the power cord plug into a proper electrical outlet.
Put the power switch into POSITION I (power on) in order to start the motor.
7
Turn I: Activate the Machine (Power On)
Turn 0: Stop the Machine (Power Off)
Machine is equipped with a semi-automatic filter cleaning system, Push & Clean. The filter cleaning system should be actuated
8
before you begin work and when suction performance is no longer sufficient. Regular use of the filter cleaning feature maintains
suction performance and increases the lifetime of the filter.
If suction performance drops:
1. Turn power switch to position "I" (Power On).
2. Close the nozzle or suction hose opening with the palm of your hand.
9
3. Press and release filter cleaning button five times to start filter cleaning. The resulting stream of air removes dust from the
slats of the filter elements.
Customer Operation and Safety Guide
Rug Doctor Support: 1-800-784-3628 |
www.rugdoctor.com
www.rugdoctor.com
Page 1 of 4