Table of Contents
Advertisement
Vacuuming Liquids
WARNING!
Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
WARNING!
•
Before vacuuming, check that the float is present.
•
If foam forms, turn off the vacuum cleaner
iinediately and empty the container.
•
Warning: switch off the vacuum cleaner iinediately
if foam or liquid leaks out.
•
Warning: the dirty liquid collected by the vacuum
cleaner must be considered conductive.
WARNING!
Do not use the vacuum cleaner without the float!
If it's used without the float, the vacuum cleaner may
be seriously damaged.
Maintenance and repairs
WARNING!
Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts or
converting it to obtain another variant.
•
Carry out only the maintenance operations
described in this manual.
•
Use only original spare parts.
•
Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action
would iinediately void the EC declaration of
conformity issued with the vacuum cleaner.
WARNING!
To carry out maintenance operations which are not
described in this manual contact the manufacturer's
Service Centre or our sales network.
Technical specifications
Parameter
Voltage / frequency
Power rating
Noise level
Protection
Insulation
Shaving capacity
(optional)
Max liquid capacity
Inlet (diameter)
Max vacuum
Maximum air flow rate
(without hose and reductions)
Dimensions
Model
WSS 100
A (in)
B (in)
C (in)
lbs
.
•
Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
•
Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
5
WSS100 - WST100 DV
WSS 100 /
Units
WST 100 DV
V/Hz
120/60
kW
1.6
dB(A)
73
IP
44
Class
I
gallons
6.6
gallons
26
in
2
in H2O
70
cfm
150
Figure 3
WST 100 DV
22.8
22.8
31.5
34.7
48.4
48.4
110
132
[ NOTE ]
09/2009
- Quick Links:
- Wiring Diagrams
Hide quick links:
Advertisement
Table of Contents
