General Recommendations; Vacuum Cleaner Description - Labels - Nilfisk-Advance cfm 125 Instruction Manual

General recommendations

DANGER !
- Risk of fire outbreaks and explosions.
The vacuum cleaner can only be used when active
sources of ignition are not going to be vacuumed.
It is forbidden to vacuum the following materials:
burning materials (embers, hot ashes, lighted cigarettes,
etc.), flammable liquids, aggressive fuels (e.g. gasoline,
solvents, acids, alkaline solutions, etc.).
It is forbidden to vacuum the following materials:
explosive dust or dust liable to spontaneous ignition
(such as magnesium or aluminium dusts, etc.).
The vacuum cleaner is not suitable for vacuuming
explosive or similar substances, as established by the
laws governing explosive substances, particularly: liquid
fuels and mixtures of flammable dust and liquids.
DANGER !
Emergency
If an emergency situation occurs:
- filter breakage
- fire outbreak
- short circuit
- motor block
- electric shock
- etc...
turn off the vacuum cleaner, unplug it and ask for
assistance to be performed by qualified personnel.
Note
Check the permissible substances.
DANGER !
The vacuum cleaners must not be used or stored
outdoors, or in damp places.
125/BDC1216/BDC1324/CV324/135/E-VAC1000

Vacuum cleaner description - Labels

See fig. 1.
List of labels - fig. 1
A - Identification plate:
Code of the model, technical specifications, serial
number, CE marking, year of manufacture
B - Dust container
C - Latches
D - Handle
E - Inlet
F - Outlet
G - Attention plate
Draws the operator's attention to the fact that the filter
must be shaken only when the vacuum cleaner is off
(see par. "Shaking the primary filter" as well).
H - Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
I - Warning plate
Indicates that the machine can not be disposed of with
other domestic waste at the end of its cycle of life (see
"Vacuum cleaner disposal").
L - Attention plate for using the vacuum cleaner
M - Warning plate for not vacuuming combustible or
hazardous materials
N - Model plate
This vacuum cleaner creates a strong airflow which is drawn
in through the inlet "E" and blows out through the outlet "F".
The hose "A" (Fig. 5) must be fitted directly into the union
supplied with the vacuum cleaner.
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorized hoses are given in the
technical specifications table.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container.
The vacuum cleaner is equipped with a primary filter which
enables it to be used for the majority of applications.
-3-
GB
09/2014