Installation; Setup - Strong PRIMA IV User Manual

PART 1 • English

5.2 Installation

5.2.1 Auto Scan
1. Use the pq buttons to select Installation, press OK to enter menu.
2. With the pq buttons select Auto Scan, press OK to enter the menu.
3. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan.
(All = Free-To-Air and scrambled channels/Free = only Free-To-Air channels)
5.2.2 Channel Scan
1. Use the pq buttons to select Installation, press OK to enter the menu.
2. Use the pq buttons to select Channel Scan and press OK to enter the menu.
3. Use the tu buttons to select one of two Scan Modes – By Channel and By Frequency.
4. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency
is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF,
highlight Search and press OK to start scan.
5.2.3 Antenna Setting
1. Press MENU to enter main menu.
2. Use the pq buttons to select Installation, press OK to enter the menu.
3. With the pq buttons select Antenna setting and press OK to enter.
4. Press the tu buttons to change setting. If On is selected, the receiver will provide 5 V antenna power (for
active antennas).
5. Press EXIT to exit.
5.2.4 LCN Mode
If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator
defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF.
Note: LCN Mode is automatically set by selecting the region during first installation. A change of LCN mode can cause
loss of some channels

5.3 Setup

This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock.
1. Press pq buttons to highlight desired menu and press OK button to enter the setting menus. Then press
pq buttons to select desired item. Settings can be changed by pressing tu buttons. You can get better
overview if press OK first. Now you can select desired setting by pq buttons and confirm it with OK.
2. Press EXIT button to exit.
5.3.1 OSD Language
This menu allows you to set OSD Language.
5.3.2 TV System
This menu allows to setup different settings concerning your TV set.
Display Mode: PAL/NTSC/AUTO
Aspect Ratio: Use this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9
(Wide Screen)
Video Output: Use this menu to switch the video output mode (RGB, CVBS or S-Video)
7