Table of Contents
Advertisement
4.0 Starting up
Ensure that your satellite receiver is correctly connected to your television and dish, and that your satel-
lite signal is of good quality. (If you are not sure about this then ask your local strong dealer to check
your installation or satellite signal.)
Confirm that the power plug on the receiver is plugged into the wall outlet. Turn on the receiver. The
following picture is shown the first time you switch on the receiver.
It is recommended that you perform the first time installation following the Installation Wizard step by
step. It will help you to easily achieve system configuration and channel installation. If you are a profes-
sional installer then you can skip wizard by pressing MENU button and set-up channels using the
Installation menu.
Press UP/DOWN to choose your language, press OK to confirm. The select satellite menu will appear
as below.
14
SCREEN 1
SCREEN 2
PART 1 English
Advertisement
Table of Contents
