Table of Contents
Advertisement
Using several handsets
Changing a handset's
internal number
A handset is automatically allocated the
lowest available number when it is regis-
tered. If all of the numbers have been allo-
cated, then number 6 is overwritten if this
handset is in idle status. You can change
the internal number of all registered hand-
sets (1–6).
Open list of internal users.
INT
s
Select handset.
Press the control key.
§Menu§
s
Select
Edit Handset
~
Enter a number.
Press the control key.
§OK§
a
Press and hold (idle status).
You will hear the error tone if an internal
number has been allocated twice.
¤
Repeat the process with an available
number.
Using a handset as a
room monitor
With this function, a previously stored
internal or external number is called when
a set noise level in the room is reached.
The room monitor call to an external
number stops after approx. 90 seconds.
The room monitor call to an internal
number (handset) stops after approx. 3
minutes (depending on the base).
During the call, all keys are locked except
the end call key. The room monitor
function remains active after you end the
call. It must be activated again if the hand-
set has been switched off.
When the room monitor function is active,
incoming calls to the handset are indi-
cated without a ring tone and only
appear on the display. The display and
keys are not illuminated and advisory
tones are also turned off.
34
Note:
– The connection to which the room monitor
– Ideally the handset should be positioned 1
– You should always check the operation
– If you answer an incoming call this will
– The active room monitor function consider-
Number.
Activating the room monitor and
entering the number to be called
§Menu§
s
The function is now activated. An internal
handset will be called.
Or:
§Menu§
~
The function is now activated. An exter-
nal number will be called.
Setting the sensitivity
§Menu§
s
is diverted must not be blocked by an acti-
vated answering machine.
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
interrupt the room monitor.
ably reduces the operating time of the
handset. Place the handset in the base if
necessary. This ensures that the battery
does not discharge.
¢
Additional Features
¢
Monitor
Call Internal
Select an internal handset or
Call All handsets
handsets are registered and
you wish all handsets to be
called) and press
¢
Additional Features
¢
Monitor
Call External
Enter the number of an exter-
nal phone and press
¢
Additional Features
¢
Monitor
Level
Choose between
and press
§OK§
¢
Room
(if several
.
§OK§
¢
Room
.
§OK§
¢
Room
Low
and
High
.
Hide quick links:
Advertisement
Table of Contents
