Download  Print this page

Locating A Handset ("Paging"); De-Registering Handsets; Using Several Handsets - Siemens Gigaset AL180 User Giude

Hide thumbs

Advertisement

Table of Contents
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Preconditions:
You have set a system PIN other than 0000
¢
p. 16.
The phone you are using for remote operation
has touch tone dialling (DTMF), i.e. you hear
different tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number)
your announcement: press the
system PIN
The following keys are used for operation:
A
Go to the start of the current message.
Press twice to go back to the previous
message.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Activating the answer machine
~
(Enter your own number and allow the phone to
ring until you hear the message: "Please enter PIN")
¢
~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deac-
tivated remotely.

Locating a handset ("paging")

You can locate your handset using the base station.
Briefly press the registration/paging key on the
¢
base station (
p. 1).
All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: briefly press the register/paging key
¢
on the base station (
a handset.
Registering handsets
You can register up to four handsets to your base
station (Gigaset AL18H/AL28H) recommended).
Please note:
Each additional handset must be registered on
the base station in order for it to work properly!
¢
while listening to
9
key and enter the
c
p. 1) or the talk key
10
For automatic registration of handsets to
Gigaset AL180/AL185/AL280/AL285, see
Manual registration of handsets to Gigaset AL180/
AL185/AL280/AL285
1. On the handset:
¢
¢
Handset
tem PIN of the base station (default is 0000)
Registering flashes in the display
2. On the base station: within 60 sec. of entering
the system PIN, press and hold the registration/
¢
paging key (
Registration takes approx. 1 minute.

De-registering handsets

Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset every other setting
If you have only registered handsets for other GAP-
compatible devices, these can only be de-regis-
tered with a hardware reset

Using several handsets

Making internal calls
Internal calls are free calls to other handsets that
are registered to the same base station.
To make a call to other handsets, press
¢
~
INT
¢
handset)
¢
star key
INT
called.
When a participant answers you can speak to
them. To end the call, press
Internal consultation call/connecting
a call
You are in conversation with an external partici-
pant. Press the
The external participant hears the hold music.
Before the internal participant has answered,
on
press the end call key
the participant who answers the call.
After the internal participant has answered,
you can talk to him. Press the end call key
the call is diverted, or press the display key ;
you are reconnected to the external participant.
¢
MENU
Settings
¢
¢
OK
Register HS
Enter the sys-
.
p. 1) (min. 3 sec.).
¢
p. 11.
¢
p. 11.
(1...4, enter internal number of the
, the handset is called or
OK
¢
P
, all handsets are
OK
a
.
key and call one or all handsets.
INT
a
; the call is diverted to
¢
p. 5.
¢
OK
¢
.
OK
a
;

Advertisement

Table of Contents
loading

  Also See for Siemens Gigaset AL180