Changing Ringer Tones; Activating/Deactivating Suppression Of The First Ring Tone; Activating/Deactivating - Siemens Gigaset C355 Manual

Changing ringer tones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and the
"crescendo" ring (6; volume increases
with each ring = ‰ ).
u
Melody:
You can select a melody from the list of
pre-loaded ringer melodies, or you can
download a melody or install one by
SMS (page 23). The first three melodies
are the "classical" ring tones.
You can also set different melodies for the
following functions:
u
Calls: For external calls
External
u
Internal Calls: For internal calls
To find out how to set ring tones for the
base, see page 39.
Setting ringer volume
The ringer volume is the same for all types
of ring.
With the handset in idle status, open the
menu Ringer Volume
briefly.
¢
Audio Settings
§Menu§
q
Adjust the volume and
press
§OK§
a
Press and hold (idle status).
Setting ringer melody
Set different ringer melodies for external
and internal calls.
¢
Audio Settings
§Menu§
Select External Calls
and press
Calls
q
Select melody (‰ = on) and
press
§OK§
a
Press and hold (idle status).
by pressing t
¢
Ringer Volume
.
¢
Ringer Melody
/ Internal
.
§OK§
.
Activating/deactivating the ringer
You can turn off the ringer on your hand-
set before you take a call or while the
phone is in the idle state. The ringer can-
not be re-activated while an external call is
in progress.
Deactivating the ringer
P
Press the star key and hold
until you can no longer hear
the ringer tone.
Re-activating the ringer
P
Press the star key and hold.

Activating/deactivating

suppression of the first ring tone
The phone identifies an incoming SMS
from the first network signal.
5 4 O 1 O
§Menu§
1
To suppress the first ring tone.
§OK§
Or:
S
To hear the first ring tone.
§OK§
Please note:
If first ringer tone suppression is deacti-
vated, then every incoming SMS will be
signalled by a ring tone. If you take this
type of "call" at the first ring tone, you will
lose the SMS.
Handset settings
37