Changing Ringer Tones; Repeater Support; Restoring The Base Default Settings - Siemens Gigaset C355 Manual

¢ ¢
Settings
§Menu§
~
Enter the current system PIN
and press
~
Enter your new system PIN
and press
PIN is shown as four stars
( **** ).
~
Now re-enter the new system
PIN and press
a
Press and hold (idle status).

Changing ringer tones

u
Volume:
You can choose between five volumes
and the "crescendo" ring, see page 37.
Press "0" to deactivate the ringer in the
base.
u
Melody:
You can set a ringer melody for external
calls, see page 37.
¢ ¢
Settings
§Menu§
¢
Ringer Volume
To find out how you make the settings, see
page 37.

Repeater support

You can use a repeater to boost the range
and reception of your base station. Before
you can use it you must activate the
repeater mode. This will terminate any
calls that are in progress at the time.
Requirement: A repeater must be regis-
tered.
¢ ¢
Settings
§Menu§
¢
Features Repeater Mode
Press the control key to con-
§OK§
firm.
When repeater mode is active, the menu
option is marked by a ‰.
¢
Base System PIN
.
§OK§
. For security the
§OK§
.
§OK§
¢
Base Audio Settings
/
Ringer Melody
¢
Base Additional
Restoring the base default
settings
Restoring the base default settings does
not de-register the handsets. The follow-
ing settings are not affected:
u
System PIN
u
SMS info services
You will find a list of the default settings in
the Appendix, page 44.
Resetting the base with the menu
¢ ¢
Settings
§Menu§
~
Enter the system PIN and
press
§OK§
Press the control key to con-
§OK§
firm.
Base station settings
¢
Base Base Reset
.
39