Siemens Gigaset C355 Manual page 18

Using other functions
¢
s s (select entry; page 14)
¢
§Menu§
The following functions can be selected
with q:
Use Number
Edit or add a stored number. Then dial
or use other functions with
(directory only)
Birthday
Add, view, edit or delete a birthday for
an existing entry.
Delete Entry
Delete a selected entry.
(directory only)
VIP Entry
Mark a directory entry as VIP (Very
Important Person) and assign it a par-
ticular ringer melody. You will now be
able to tell VIP calls from the ringer mel-
ody.
This feature requires caller display
(CLI) (page 11).
Send Entry
Send a single entry to another handset
(page 15).
Delete List
Delete all entries in the directory/call-
by-call list.
Send List
Send the complete list to another hand-
set (page 15).
(directory only)
Shortcut
Assign the current entry to a selected
key for speed dialling.
Using speed dial keys
¤
Press the required speed dial key and
hold.
Sending the directory/call-by-call list
to another handset
Requirements:
u
u
.
§Menu§
s
~
A successful transfer is confirmed by a
message and the confirmation tone at the
receiver handset.
Please note:
u
u
Copying a displayed number to the
directory
You can copy numbers to the directory;
they will be displayed in a list, e.g. the
calls list or last number redial list, in an
SMS or during a call.
A number is displayed:
§Menu§
¤
Message playback is interrupted during
number copying from the answering
machine list.
Using the directory and lists
The sending and receiving handsets
must both be registered to the same
base unit.
The other handset and the base unit
can send and receive directory entries.
¢
q (select entry; page 14)
¢ ¢
Send Entry
§Menu§
Enter the internal number of
the receiver handset and
press .
§OK§
Entries with identical numbers are not
overwritten in the receiver handset.
The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
¢
Copy to Directory
Complete the entry (page 14).
/
Send List
15