Connecting the charging cradle (if included)
If you need to disconnect the plug from the charging cradle,
press the release button
Setting up the handset for use
Inserting the batteries and closing the battery cover
Use only the rechargeable batteries recommended by Gigaset Communicatons GmbH
(¢ page 14). Never use a conventional (non-rechargeable) battery or other battery types
as this could result in significant health risks and personal injury. For example, the batteries
could explode. The phone could also malfunction or be damaged as a result of using bat-
teries that are not of the recommended type.
¤ Insert the batteries the right
The polarity is indicated in/on
the battery compartment.
If you need to open the battery cover, for
instance to replace the batteries, place
your fingertip in the cavity on the casing
and pull the battery cover upwards.
and disconnect the plug 2.
The display is protected by a plastic film.
Please remove the protective film!
¤ Connect the flat plug from the power supply 1.
¤ Plug the mains adapter into the plug socket 2.
¤ First insert the battery cover at the top
¤ Then press the cover
until it clicks