Pc Connection With Dv Interface Cable; Printing Pictures By Directly Connecting To The Printer (Pictbridge) - Panasonic PV-GS400 Operating Instructions Manual

PV-GS400Eng.book 56 ページ ２００４年６月４日 金曜日 午後３時１７分
PC Connection With DV Interface
Cable
A video clip can be transferred directly to your PC
(personal computer) via a DV Interface Cable
(optional) using products and software from a
number of video editing software companies.
Using products from video editing software
companies allows you to capture and edit video
clips using the DV Interface.
Panasonic DVC are OHCI compliant and
should have no problem working with any
OHCI compliant Firewire Card/Video —
Editing software package.
≥Personal computer must be equipped with an
DV Terminal.
≥During Camcorder playback, do not disconnect
the DV Interface Cable or turn the Camcorder
off as this may cause a PC hang-up error.
≥1394 (i. LINK) Interface must conform to OHCI
(Open Host Controller Interface Specification).
56
Editing Mode
Printing pictures by directly
connecting to the printer
(PictBridge)
After connecting the Camcorder with a printer
compatible with PictBridge, start the following
procedures.
≥To print pictures by directly connecting the
≥You cannot print images which cannot be played
≥Check the settings for the paper size, quality of
≥We recommend using the AC Adaptor as the
1
DV
2
1 USB Cable
≥The [PRINT] Indication appears on the screen
Camcorder to the printer, prepare a printer
compatible with PictBridge. (Also read the
operating instructions of the printer.)
on the Camcorder.
print, etc. on the printer.
power source.
Set the Mode Dial (44) to Picture Playback
Mode.
(44)
Connect the printer with the supplied USB
Cable.
REMOTE/MIC
(PLUG IN POWER)
AV IN/OUT
PHONES
1
PRINT
of the Camcorder.
Highlighted: Printable
Blinking: Printer is being recognized.