Computer Input; Input Source Selection - Sanyo PLC-SW35 Owner's Manual

Computer Input

Input Source Selection

Direct Operation
Choose Computer by pressing the INPUT button on the top
control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Input Menu icon.
2 Press the Point
Computer and then press the SELECT button.
3
After the Source Select Menu appears for Computer, move
the pointer to RGB and then press the SELECT button.
24
7 8 button to move the red frame
d d button to move the red arrow pointer to
INPUT button
WARNING
LAMP
POWER
REPLACE
INPUT
ON-OFF
MENU
SELECT
Remote Control
ON - OFF
COMPUTER VIDEO
VOLUME - VOLUME +
MENU SELECT
Input Menu icon
Input Menu
D.ZOOM KEYSTONE IMAGE NO SHOW
P - TIMER
FREEZE AUTO PC
Move the pointer (red
arrow) to Computer
MUTE
and press the SELECT
button.
Computer
Source Select Menu
Move the pointer to RGB and
press the SELECT button.
INPUT
button
Computer
Video
COMPUTER
button