P-Timer Function; Sound Adjustment - Sanyo PLC-SW35 Owner's Manual

P-Timer Function

Press the P-TIMER button on the remote control. The timer
display "00 : 00" appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. And then, press
the P-TIMER button again to cancel the P-Timer function.

Sound Adjustment

Direct Operation
Volume
Press the VOLUME (+/–) button on the top control or on the
remote control to adjust volume. The volume dialog box appears
on the screen for a few seconds.
(+) button to turn up the volume and (–) button to turn down the
volume.
Mute
Press the MUTE button on the remote control to cut off sound.
To restore sound to its previous level, press the MUTE button
again or press the VOLUME (+/–) button.
Menu Operation
1 Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Sound Menu icon.
2
Press the Point d d button to move the red frame pointer to
the item that you want to select, and then press the SELECT
button.
Volume
Press the Point 8 button to turn up the volume, and press the
Point button to turn down the volume.
7
Mute
Press the Point 7 8 button to cut off sound. Dialog box display is
changed to "On" and sound is cut off. To restore sound to its
previous level, press the Point
button to move the red frame
7 8
7 8 button again.
indicates approximate
level of volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
Sound Menu
indicates approximate
level of volume.
closes the Sound Menu.
Basic Operation
Sound Menu icon
23