Table of Contents
Advertisement
Video Input
Input Source Selection
Direct Operation
Choose either VIDEO or COMPUTER by pressing the INPUT
button on the top control or VIDEO or COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Input Menu icon.
2
Press the Point
VIDEO or COMPUTER and then press the SELECT button.
The Source Select Menu will appear.
VIDEO, video input is selected.
COMPUTER, go to step 3 to select input source.
3
Move the pointer to the correct input source and then press
the SELECT button.
When the input source is connected to the
S-Video
COMPUTER / S-VIDEO / COMPONENT IN with
a S-Video-VGA Cable, select S-Video.
When the input source is coming from video
Component
equipment connected to the COMPUTER / S-
VIDEO / COMPONENT IN with a Component-
VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER / S-
VIDEO / COMPONENT IN with a Scart-VGA
Cable, select RGB (Scart).
✔
Note:
• S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionally
supplied. See page 57 for order.
32
7 8
button to move the red frame
d d
button to move the red arrow pointer to
When you select
When you select
INPUT button
WARNING
POWER
LAMP
REPLACE
INPUT
ON-OFF
MENU
SELECT
Remote Control
ON - OFF
COMPUTER VIDEO
VOLUME -
VOLUME +
MENU
SELECT
Input Menu icon
Input Menu
D.ZOOM
KEYSTONE
IMAGE
NO SHOW
Move the pointer (red arrow)
to Computer and press the
P - TIMER
FREEZE
AUTO PC
SELECT button.
MUTE
Computer
Source Select Menu
Move the pointer to S-Video,
Component, RGB (Scart) and
press the SELECT button.
INPUT
button
Computer
Video
COMPUTER
button
VIDEO
button
Advertisement
Table of Contents
