Screen Size Adjustment - Sanyo PLC-SW35 Owner's Manual

Screen Size Adjustment

This projector has a picture screen resize function, which enables you to display the desirable image size.
1 Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Screen Menu icon.
2 Press the Point d d button and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is
larger than the screen size (800 x 600), this projector enters
"Digital zoom +" mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital Zoom +
When the Digital Zoom + is selected, the On-Screen Menu
disappears and the message "D. Zoom +" is displayed. Press the
SELECT button to expand the image size. And press the Point
e e d d 7 8 button to pan the image. The Panning function can work
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM
▲ button on the remote control.
Digital Zoom –
When the Digital Zoom – is selected, the On-Screen Menu
disappears and the message "D. Zoom –" is displayed. Press the
SELECT button to compress the image size.
A projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control.
To exit the Digital Zoom +/– mode, press any button except the
D.ZOOM ▲▼, SELECT, and Point button.
To return to the normal screen, press KEYSTONE button or
▲▼ button or select Normal from the Screen menu.
ZOOM
✔
Note:
• This Screen Menu cannot be operated when "720p(HDTV)", "1035i (HDTV)", or
"1080i (HDTV)" is selected in the PC System Menu (p25).
• The True and Digital Zoom +/– cannot be selected when "480i", "575i", "480p",
or "575p" is selected in the PC System Menu (p25).
• This projector cannot display any resolution higher than 1280 x 1024. If your
computer's screen resolution is higher than 1280 X 1024, reset the resolution to the
lower before connecting to the projector.
• The image data in other than SVGA (1280 x 1024) is modified to fit the screen size
in initial mode.
• The panning function may not operate properly if the computer system prepared in
the PC Adjust Menu is used.
7 8 button to move the red frame
Screen Menu
D.
Computer Input
Screen Menu icon
Move the red frame to the
function and press the SELECT
button.
31