Image Level Selection - Sanyo PLC-SW35 Owner's Manual

Image Level Selection

Direct Operation
Select an image level among Dynamic, Standard, Real,
Blackboard(Green), Image 1, Image 2, Image 3, and Image 4 by
pressing the IMAGE button on the remote control.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Image 1~4
User preset image in the Image Adjust Menu (p30).
Menu Operation
1 Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Image Select Menu icon.
2
Press the Point d d button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard.
See above for further description.
Image 1~4
User preset image in the Image Adjust Menu (p30).
7 8 button to move the red frame
ON - OFF
COMPUTER VIDEO
Remote Control
VOLUME - VOLUME +
MENU SELECT
D.ZOOM KEYSTONE IMAGE NO SHOW
P - TIMER
FREEZE AUTO PC
MUTE
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Select Menu icon
Image Select Menu
Move the red frame pointer to
the level and press the
SELECT button.
The level being selected.
Computer Input
IMAGE
button
29