Video System Selection - Sanyo PLC-SW35 Owner's Manual

Video System Selection

1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the AV System Menu icon.
2 Press the Point d d button to move the red arrow pointer to
the system that you want to select and then press the
SELECT button.
Video or S-Video
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format
among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.
7 8 button to move the red frame
AV System Menu (Video or S-Video)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button.
AV System Menu (Component)
AV System Menu icon
This box indicates the system
being selected.
Move the pointer to a system
and press the SELECT button.
Video Input
33